Custom Lithium Primary Battery Packs
House of Batteries designs, develops, and manufactures custom lithium primary battery packs and assemblies for a wide range of applications. Utilizing advanced mechanical and electronic design techniques, our skilled battery design team will optimize your custom battery packs’ reliability, manufacturability, and safety. This process gives our customers the most dependable, most economical lithium primary battery pack solutions for their unique needs.
Custom Lithium Battery Packs & Assemblies
Lithium is the lightest non-gaseous metal, and its negative potential for battery packs is higher than any other metal. Lithium-chemistry batteries and battery packs have the highest specific energy (energy per unit weight) and energy density (energy per unit volume) of all battery types.
While most lithium cells have open circuit voltages (OCVs) between 2.7 and 3.6 V, most lithium primary cells have a relatively high impedance which generally limits them to low-drain applications. Special high-rate discharge cells are available for certain applications.
Lithium primary batteries often have broad operating temperature ranges, and can continue to function properly at temperatures from -55° to 150°C (-67° to 302°F). Though incineration or other exposure to extremely high temperatures can cause lithium batteries to experience catastrophic failure, other battery types typically react similarly in the same conditions.
Primary lithium battery packs are available in several different chemistries, each with its own set of performance and safety characteristics. Poly (carbon monofluoride) lithium, or (CF)X-Li; manganese dioxide lithium, or MnO2Li; thionyl chloride lithium, or SOCl2Li; and sulfur dioxide lithium, or SO2Li, have all proven to be especially popular and effective.
Custom Lithium-Manganese Dioxide Battery Packs & Assemblies
Manganese dioxide lithium cells are similar to poly (carbon mono-fluoride) cells in energy density, construction, safety, and OCV, but generally provide only about half the service life. However, MnO2Li cells are well-suited to applications requiring relatively high continuous- or pulse-current requirements, as their internal impedance is lower than that of other chemistries.
Manganese dioxide lithium batteries are available in many standard cylindrical and coin sizes.
Custom Lithium-Poly Carbon Monoflouride Battery Packs & Assemblies
Poly (carbon monofluoride) cells are an excellent solution for long-term, low-drain applications. They have an OCV of 3V and fairly high energy density. Though generally safe, in extreme conditions their elastomer seals can fail before the casing does, thus allowing the relatively reactive cell components to escape.
Lithium-poly carbon monofluoride cells are available in all standard cylindrical sizes, as well as coin configurations. Cylindrical cells are manufactured with spiral-shaped cathodes and crimped elastomer seals.
Custom Lithium-Thionyl Chloride Battery Packs & Assemblies
Thionyl chloride-lithium cells are best suited for applications having very low continuous-current and moderate pulse-current requirements. These cells have the highest energy density of all lithium types, and are manufactured in welded, hermetically sealed cases. Service life is an unmatched 20-plus years, which holds for all case types—cylindrical and coin/wafer.
The extremely long service life and low self-discharge rate of thionyl chloride-lithium cells make them ideal for applications where physical access is limited, such as for remote sensing systems. For example, wireless passive infrared (PIR) sensors used in security systems typically draw very small currents (tens of μA) in quiescent mode and 7.5 mA to 10 mA while transmitting. Under these operating conditions, lithium-thionyl chloride battery cells offer service life up to 2.5 times longer than either poly (carbon monofluoride) or manganese-dioxide lithium cells of equal size.
Custom Lithium-Sulfur Dioxide Battery Packs & Assemblies
Sulfur dioxide-lithium cells are used almost exclusively in military/aerospace applications. This chemistry provides somewhat lower energy density than manganese dioxide-lithium or poly (carbon monofluoride) lithium cells, and their energy density and service life are generally less than half than that of thionyl chloride-lithium cells. “Emergency” vent structures are required in these batteries’ hermetically welded cases for safety purposes.
Other Custom Primary Lithium Battery Systems
In addition to LiSOCl2 and Li-SO2 cells, a variety of other primary lithium cell types are available. Each lithium chemistry offers different technical attributes for specific applications.
Li-I2 cells offer outstanding performance, very low self-discharge rates, high reliability, and very high hermeticity. They are used for limited applications, such as cardiac pacemakers.
Lithium-Iron Sulfide Cells
Li-FeS2cells have very low self-discharge rates and very high pulse capabilities—as high as 1.5 amps for AA size cells. These batteries are designed for niche markets, such as camera flash systems.
Lithium-Copper Oxide Cells
Lithium-copper oxide and lithium-copper oxyphosphate cells were taken out of production in the mid-1990s. This chemistry is now used only sparingly for highly specialized applications.